Adjustable Bike Trainer Fitness Desk - Portable Workstation Standing Desk for Indoor Cycling, Exercise & Home Office Use | Perfect for Workouts, Remote Work & Multitasking

This is a very sturdy workstation. Directions are clear and easy to follow. A parts list and pictures shows each part. In the diagrams each screw and part are labeled. There is one caution note that part "E" and "F" cannot be exchanged. These are the two legs left and right under the tabletop. Each screw is labeled on the diagram and position is shown. Takes about 3 hours to assemble including checking to see that all parts are included. There is a tiny wrench and an Allen wrench included. Screws must be carefully inserted or they will be stripped and rendered unusable. One problem I encountered was the fitting of the brackets below the legs and tabletop. The left side bracket did not fit in the location due to the screw hole on the leg was not in required position. This is the bracket that supports the tabletop to the leg and is required to be a support to the top and in my case important for my stability if I should grab it for support. The brackets are very heavy metal. I "re-engineered" the left bracket using a vise and a 2.5 pound hammer and pounded it into position required to fit the screw hole. At the base of each assembly step, a picture of the required screws and number needed in that step are shown. All pieces are clearly labeled. This workstation does fit around my treadmill and is adjustable in height to be raised or lowered as needed. There is a pencil tray and a cup holder and a towel holder. Tabletop is finished in a dark wood grain pattern. I would recommend this workstation for standing desk, over treadmill or cycling workouts. Good sturdy parts. Directions easy to follow but be sure to read carefully.